search

 

Data Cables
 
Category 5e (Cat5e)
Category 5e (Cat5e)
Copper data cables for transmission of up to 1 Gbps per IEEE 802.3z (GbE), recommended for installation in apartments, homes and small offices (SOHO’s). All the cables contain 4 twisted pairs having solid polyethylene insulation. The individual pairs are not screened; however some Cat 5e cables (F/UTP) are overall screened to reduce RFI. A variety of cables are available: PVC or HFFR jacket, horizontal as well as patch cables, packaged on reels or in cardboard boxes, for indoor or outdoor use.
Category 6 (Cat6)
Category 6 (Cat6)
Copper data cables for transmission of up to 1 Gbps per IEEE 802.3z (GbE), recommended for installation in small home offices (SOHO’s) and medium-sized offices. All the cables contain 4 twisted copper pairs having solid polyethylene insulation. The cables are not screened. Both horizontal and patch cables are available.
Category 6A (Cat6A)
Category 6A (Cat6A)
Copper data cables for transmission of up to 10 Gbps per IEEE802.3an (10GbE), recommended for installation in office buildings and campuses. All the cables contain 4 twisted copper pairs having foamed insulation individually screened with an aluminum-backed foil. A drain wire in contact with the screen is used for proper cable grounding. The aluminum foil is applied in a Draka patented Figure-8 structure, making the cables easy to install while maintaining the highest transmission performance. The cable jacket is made of HFFR, and its color is light blue.
Category 7 (cat7)
Category 7 (cat7)
Copper data cables for transmission of up to 10 Gbps per IEEE802.3an (10GbE), recommended for installation in office buildings and campuses. All the cables contain 4 twisted copper pairs having foamed insulation, individually screened with an aluminum-backed foil. A drain wire in contact with the screen is used for cable grounding. An overall screen of either aluminum foil or tinned-copper braid improves the cable immunity to RFI due to high coupling attenuation and low transfer impedance.
Category 7A (Cat7A)
Category 7A (Cat7A)
Copper data cables specifically designed for the most reliable transmission of up to 10 Gbps per IEEE802.3an (10GbE). These cables are recommended for installation in office buildings where very high bit rates are needed, as well as in data centers and blade-based computer centers. All the cables contain 4 twisted copper pairs having foamed insulation, individually screened with an aluminum-backed foil. A drain wire in contact with the screen is used for cable grounding. A tinned-copper braid assures the highest immunity to RFI and EMI.
Multimedia Cables
Multimedia Cables
Communication cables allowing transmission of digital and analog information at frequencies of up to 1500 MHz over 4 foam-skin insulated twisted copper pairs. The cables can be used for transmission of high quality video signals as well as 10 Gbps data per IEEE-802.3an. All the cables contain 4 twisted copper pairs having foamed insulation, individually screened with an aluminum-backed foil. A drain wire in contact with the screen is used for cable grounding. A tinned-copper braid assures the highest immunity to RFI and EMI.
Data Center Cables
Data Center Cables
Copper data cables developed by Draka especially for use in data centers. In a data center environment, space is at a premium while link lengths are typically short. Therefore the Draka UCFuture data cables fully meet the Cat 7 data cable requirements, while being based on 26 AWG thin copper wires. The thin wires make the cables light and small still allowing 10 Gbps data transmission up to a distance of 60 meters. For more information read more.
בניית אתרים  Site Builder
 
  
 

DCC – Duchovni Communications Cables - Advanced Cabling and Connectivity Solutions

POB 25008, 17 Hamashbir St. Haifa 31250 Israel , Tel. +972-4-881-8404, Fax +972-4-881-8405

© Copyright DCC Ltd. 
Privacy Policy / Terms of Use